This guide walks you through the installation of your EcoSmart Fire Pillar fireplace. Follow each step carefully to ensure safe and correct setup.

Do not operate the appliance until it has been securely fastened using the included ground fixing brackets.

Equipment required:

Timber/Wood: pencil, short Philips head screw driver, drill and pilot drill bit.

Concrete/Stone: pencil, short Philips head screw driver, hammer, masonry drill and masonry bit.

Position the fireplace in accordance to the compulsory minimum clearances outlined on the Fireplace Clearances page (indoor only).

1. Confirm you have received all necessary parts as illustrated.

2. Insert burner into the model.

3. Carefully place the glass fire screen onto the three (3) metal brackets. Ensure bumpers are intact on the brackets to prevent damaging the glass fire screen.

4. Unscrew the threaded rod located in the centre of the burner tray.

Free the ground plate located at the bottom of the unit.

5. Mark the ground fixing position.

6a. Move ground fixing plate and pilot drill 1 (one) hole for wood screws provided;

6b. Move ground fixing plate and pilot drill 1 (one) hole for masonry anchors provided;

7. Secure the ground plate with a screw.

8. Place the unit over the ground plate (centre) and secure with threaded rod to complete.

Operate according to the Burner Operations Manual included with the burner.

Applies to:

• Pillar 3L, Pillar 3T