Step-by-step instructions for securing your EcoSmart Fire Heritage Grate, including required tools, indoor setup, and burner installation.

Equipment required:

Concrete/Stone: pencil, wrench, short Philips head screw driver, hammer, masonry drill and masonry bit.

Position the fireplace in accordance to the compulsory minimum clearances outlined on the Fireplace Clearances page. (Indoor only).

1. Confirm you have received all necessary parts as illustrated;

Installation Steps - Heritage Fireplace Grates 1

2. Place the grate into desired location, mark the fixation points;

Installation Steps - Heritage Fireplace Grates 2

3a. Move grate and pilot drill 4 (four) holes for wood screws provided. Remove nut;

Installation Steps - Heritage Fireplace Grates 3

3b. Align the eyelets of the grate feet, screw the nuts to secure the grate;

Installation Steps - Heritage Fireplace Grates 4

4. Insert burner into the grate.

Installation Steps - Heritage Fireplace Grates 5

5. Install the ceramic decorative logs around the burner. Do not place on top of the burner.

Installation Steps - Heritage Fireplace Grates 6

Do not place real timber or any combustible decorative media in the appliance.

Operate according to the Burner Operations Manual included with the burner.

Applies to:

  • Heritage 25, Heritage 50